软管泵资质认证

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

泥浆泵软管泵注意部件：活塞、活塞压板、皮碗、活塞座、活塞杆、柱塞杆、进排水阀、进排水阀阀座、十字头、十字头滑套、十字头销轴、曲轴、连杆、连杆上下瓦、连杆铜套、连杆螺钉及母、冠型螺母、骨架油封、O型密封圈、轴承及相配套的齿轮、轴等容易出质量问题，在购买和使用中应当注意。<br />！                 
              

软管泵是由泵壳、转子体、机座、软管、减速电机以及电控系统等部分组成。转子体旋转，转子体上的一对压辊沿着一根特制的胶管旋转，压辊与泵壳产生的挤压力将胶管压扁，在管子自身弹性和侧导辊的作用下，通过恢复原状产生的真空吸入物料，物料从管内排出，这样往复循环。 

The hose pump is composed of pump casing, rotor body, frame, hose, reduction motor and electronic control system. The rotor body rotates, and a pair of pressure rollers on the rotor body rotates along a special rubber hose. The squeezing force generated by the pressure roller and the pump casing will flatten the rubber hose. The elasticity of the tube and the side guide rollers restore the The vacuum produced by the original state sucks the material, and the material is discharged from the tube, so as to reciprocate.